In September 16th, Liu Yulu, a member of the China Paper Industry Committee and deputy general manager, studied Huaxin color printing. He also attended a party lecture on "the party's strict management of the party is always on the road" for all the party members, middle managers and representatives of reserve cadres.

According to the government procurement law of the people's Republic of China, the bidding law of the people's Republic of China and the measures of Guangdong Province for the implementation of the bidding law of the people's Republic of China, the public bidding for the security monitoring system project of Huaxin (Foshan) Color Printing Co., Ltd. is organized. Domestic qualified bidders are welcome to participate in the sealed bidding.

According to the requirements of the "decision of the State Council on Amending the regulations on the administration of environmental protection of construction projects" (Order No. 682 of the State Council), "announcement on Issuing the Interim Measures for the acceptance of environmental protection of completed construction projects" (national environmental planning and environmental assessment [2017] No. 4) and so on, the completion environmental protection inspection of the expansion project (first phase) of the third phase production workshop of Huaxin (Fushan) Color Printing Co., Ltd. is carried out The investigation was publicized. 1、 Brief introduction of construction project: （1） Project Name: Huaxin (Foshan) Color Printing Co., Ltd. phase III production workshop expansion project (phase I) （2） Project nature: expansion （3） Construction site: No.3, Keyang Road, high tech Development Zone, Chancheng District, Foshan City （4） Industry: c2319 packaging, decoration and other printing industry （5） Project scale: Huaxin (Foshan) Color Printing Co., Ltd. is located at no.1-10, No.3, Keyang Road, luogewei Park, Chancheng Economic Development Zone, Foshan City (central geographic coordinates: 23 ° 00'31.32 "n, 113 ° 01'20.21" E). The enterprise obtained the notice of Foshan Chancheng District Environmental Protection Bureau on relocation and expansion project of Huaxin (Foshan) Color Printing Co., Ltd. on August 19, 2004 Reply to the environmental impact report form (№ b2004-0393), and obtained the "opinions of Foshan Chancheng District Environmental Protection Bureau on the environmental protection acceptance of the completion of Huaxin (Foshan) Color Printing Co., Ltd. relocation and expansion project" (CHY [2006] No. 149) on October 20, 2006. On November 22, 2006, the enterprise submitted the phase II environmental impact registration form of construction project (d2006-0473), and passed the acceptance of Foshan Chancheng District Environmental Protection Bureau on June 6, 2008. Due to the needs of production and development of the enterprise, Huaxin (Foshan) Color Printing Co., Ltd. applied for the environmental impact report of phase III expansion project of Huaxin (Foshan) Color Printing Co., Ltd. issued by the Environmental Protection Bureau of Chancheng District of Foshan City in June 2012, and obtained the reply document (No: cb2012-1-028) from the Environmental Protection Bureau of Chancheng District. The phase III expansion project is located in the plant area In the north, a new four storey factory with an area of 11833m2 and a building area of 47333m2 will be built, including warehouse on the first floor, offset printing workshop on the second and third floors, and flexo printing workshop on the fourth floor. The declared equipment includes 6 sets of Heidelberg offset press, 3 sets of die-cutting machine, 5 sets of box sticking machine, 3 sets of flexo press, 3 sets of AVT quality inspection machine and 6 sets of slitting machine. The annual output of packaging and decoration products of the third phase expansion project is 20000 tons. In the actual construction process, the construction unit has completed the civil work according to the original EIA content: build a new four floor factory with an area of 11833m2 and a building area of 47333m2, of which the first floor is the warehouse, the second floor is the offset printing workshop, the third floor is the rented warehouse, and the fourth floor is the flexible printing workshop. At present, only phase III (first phase) equipment has been installed: 2 sets of Heidelberg offset press, 3 sets of die-cutting machine, 5 sets of box sticking machine, 2 sets of flexo press, 3 sets of AVT inspection machine and 3 sets of slitting machine. The annual output of packaging and decoration products of phase III (first phase) expansion project is 9000 tons. The existing equipment does not reach the scale of the original EIA declared equipment. Therefore, the acceptance of the third phase expansion project is carried out by stages. At present, the overall situation of main production equipment after expansion is as follows: 5 sets of Heidelberg offset press, 1 set of offset press, 6 sets of die-cutting machine, 5 sets of box sticking machine, 4 sets of flexo press, 3 sets of AVT quality inspection machine, 3 sets of slitting machine, 1 set of six color gravure press, 1 set of automatic water-based laminating machine, 1 set of polishing machine, 1 set of solvent-free laminating machine, 1 set of film coating machine, 1 set of film punching machine, 1 set of lithography output machine and 1 set of lithography printer 1 ps plate developing machine, 7 paper cutting machines, 2 code adding machines, 3 paper aligning machines, 5 automatic quality inspection machines, 2 waste discharging machines, 5 manual quality inspection machines, 1 quality inspection rewinder, 1 paper counting machine, 1 folding machine, 1 pre wrapping machine and 1 punching machine. 2、 Conta